Samsung SP43Q5HL1X, SP54T8HL, SP52Q2HL Memorizing the Channels, Selecting the Video Signal Source

O P E R AT I O N

Memorizing the Channels

Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits.

Selecting the Video Signal Source

Before your TV can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e., an antenna or a cable system).

1

Press the MENU button.

Press the … or † button to select “Channel”, then press the ENTER button.

TV	Channel
	Air/CATV	:	Air	√
	Auto Program			√
	Favorite Channels			√
	Fine Tune	œ	00	√
	Add/Delete			√
	Name	œ - - - -		√
Move	Enter		Return

2

Press the ENTER button to select “Air/CATV”.

Press the … or † button to select “Air”, “STD”, “HRC” or “IRC”, then press the ENTER button.

Press the EXIT button to exit.

TV Channel

	Air/CATV	:	Air
	Auto Program		STD
	Favorite ChannelsHRC
	Fine Tune	œ	IRC
	Add/Delete
	Name	œ - - - -
Move	Enter		Return

œIf you are connected to an antenna, press the … or † button to select “Air”.

œIf you connected cable, press the … or † button to select the type of cable system:

“STD”, “HRC” or “IRC”.

•“STD”, “HRC” and “IRC” identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected. Proceed to “Storing Channels in Memory”.

•Subscription cable services require service-specific requirement for viewing.

English - 26