Speech to Action
Section 2H. Speech to Action 95
Using Choice Lists
If your device is not confident it has recognized a name
or number correctly, it might display a choice list and
prompt you with “Call?” followed by the first choice on
the list. To confirm the choice, say “Yes,” or to hear the
next choice, say “No.” You can also select the correct
choice by touching the associated onscreen option. To
cancel the command, say “Cancel,” or to say the name
or number again, say “Repeat.”
Enabling and Disabling Choice Lists
You can customize whether the Voice Recognition
feature displays either a list of top Voice Recognition
choices or automatically dials the first number without
displaying a choice list.
To enable or disable choice lists for Digit Dial:
1. Press .
2. From the “Say a Command” page, touch Settings >
Mode. (The device displays a reset voice dialog.)
3. Touch one of the following onscreen options:
䡲Expert Mode displays both a selectable list of
matching entries and if the first entry is not
correct, the device will continue to read out each
available option until it detects either a
confirmation (Yes) or rejection (No).
䡲Prompt Mode displays a selectable list of available
dialing options and only reads out the entry
name. You are required to touch an onscreen
option to activate a command.
Readout Mode announces only the Speech to Action
menu options that are currently displayed onscreen.
Nerva.book Page 95 Tuesday, June 24, 2008 3:59 PM