44 Section 2B. Settings
Touch Settings
Touch Sensitivity
The Instinct's touch screen requires a small amount of
pressure to operate. The smaller the size of your
contact point on the screen, the less the amount of
pressure required. The tip of your finger will work better
than the pad of your finger, and a fingernail or stylus
will require even less pressure. Initially, your device's
sensitivity is set to its highest level. Once you have
discovered your preferred method for operating your
touchscreen, you may find that it is too sensitive for
some applications. You can adjust how sensitive the
device is to touch actions on the screen.
1. Press and touch Main () > Settings >
General > Touch Sensitivity.
2. Touch and drag the slider left or right to adjust the
sensitivity level.
䡲Touch the onscreen Touch Here button to gauge
the response of the new sensitivity level.
3. Once you are done, touch Done.
Screen Calibration
Use this menu to re-align the screen’s touch accuracy.
This should only be done if the device does not appear
to be responding properly to onscreen touches.
1. Press and touch Main () > Settings >
General > Calibration.
2. Touch OK and follow the onscreen instructions.
3. Use either your fingertip or stylus to touch the four
crosshair locations on the screen.
Important For this calibration process to complete
successfully, it is recommended that you use
the stylus to accurately set the new calibration
touch points.
Nerva.book Page 44 Tuesday, June 24, 2008 3:59 PM