Speech to Action
Section 2H. Speech to Action 93
3. Touch one of the available options:
䡲Automatic to always provide you with options if
there was an issue registering the command,
confirm any commands, and then announce any
actions.
䡲Always Confirm to always confirm any command
actions before they are done, even if it was
properly registered.
䡲Never Confirm to never confirm any command
operations. The device will always act on what it
registers as the current command, even if it is
incorrect and without notifying you.
Adaptation
Some users with heavy accents or unusual voice
characteristics may find it difficult to achieve high
accuracy with their word recognition. The Adaptation
mode, with its Adapt Voice feature allows users to
dramatically improve the device’s accuracy by
retraining of the onboard recognition software.
(If you are satisfied with the voice recognition system's
accuracy, you don't need to use the Adaptation mode.)
After you have completed the Adaptation mode, your
device will be customized to your voice. Other people
will not be able to use your device unless they reset it
to factory defaults.
Training involves recording several number sequences
and common words to teach the system your voice.
This process takes about three minutes.
Tips for using the Adaptation mode:
䢇Use the Adapt Voice feature in a quiet place.
䢇Make sure you wait for the beep before starting to
speak.
䢇Speak clearly, but say each digit sequence naturally.
Note ONLY use the Adaptation mode if the system is
frequently misrecognizing your speech. You can
always restore the system to its original factory
setting. See “Resetting Voice Recognition” on
page 94.
Nerva.book Page 93 Tuesday, June 24, 2008 3:59 PM