92 Section 2H. Speech to Action
Launching an Application
Open an application or access a menu by saying “Go
To” followed by the name of the application or menu.
To see a list of possible choices:
1. Press .
2. Say “Go To.” A list of valid destinations is displayed
and you are prompted with “Which shortcut?”
䡲If the list is too long to fit on one screen, you can
say the name of a destination.
䡲Examples can include: Traffic, Weather, Movie,
Sports, News, Search, etc.
3. Say the name of the application you want the
device to activate.
Speech to Action Settings
To configure the voice settings:
1. Press on the side of your device. You will hear
a prompt.
2. From the “Say a Command” page, touch Settings.
– or –
Press and touch
Main ( ) > Settings >
Speech to Action.
From the Settings page you can configure the verbal
Confirmation, activate the training mode (Adaptation),
configure the modes (Expert/Prompt/Readout), or get
information about the Speech to Action software.
Setting the Confirmation
Your device can be configured to take a specific action
prior to initiating any voice command parameter.
1. Press on the side of your device. You will hear
a prompt.
2. From the “Say a Command” page, touch Settings >
Confirmation.
Nerva.book Page 92 Tuesday, June 24, 2008 3:59 PM