Samsung SRD-470, 470D user manual Setting the Device, Setting the Camera, Press Enter button

using the DVR

SETTING THE DEVICE

You can setup Camera, Storage Device, Remote Device, POS Device and Monitor.

Camera

Setting the Camera

You can set Video, Audio, Channel Name and Dwell Time of a Camera.

Using the mouse may help make setup easier.

1.Press the [MENU] button on the remote control or front panel.

2.Use the left/right button (◄ ►) to select <Device>. Device setting menu is selected.

3. Use the up/down buttons (	) to move to <Camera>,
and press [ENTER] button.

Logout

Device

Camera

Storage Device

Remote Device

POS Device

Monitor

Exit

4.Select <Camera>.

You will see a window where you can confi gure the camera settings including Video, Audio, Channel Name, Dwell Time and Progressive.

5. Use direction buttons (	) to move to a desired
item, and set the value.

•Video

-<ON/OFF> : You can turn ON/OFF the selected channel’s camera.

Camera

Camera		PTZ
CH	Video	Audio	CH Name	SEQ-Dwell Time	Progressive
1	ON	OFF	CAM 01	5 sec	OFF
2	ON	OFF	CAM 02	5 sec	OFF
3	ON	OFF	CAM 03	5 sec	OFF
4	ON	OFF	CAM 04	5 sec	OFF

Screen Setup

OK Cancel

-<Covert1> : Shows information other than the video of the selected channel.

For privacy protection, it does not display the video while the recording continues.

-<Covert2> : Shows nothing but an empty screen while the recording continues.

•Audio

-If set to <ON>, you can turn the audio of the channel ON/OFF on the Live screen.

-If set to <OFF>, the channel’s audio is off on the Live screen and not recorded.

Audio output is available for only 1 channel.

•CH Name : Up to 15 characters including blanks are allowed.

 Refer to “Using Virtual Keyboard”. (Page 34)

•SEQ-Dwell Time : You can set the dwell time between channels for the Live screen and Spot Out.

 If set to <OFF>, the channel is not listed in the Auto Sequence mode.

42_ using the DVR

Z6806127401A_SRD-470, 470D-IB_EN42 42

2010-04-30 오후 6:08:17