Samsung 470D, SRD-470 Setting the Event, Sensor Detection, Detection, and press Enter button

•Auto Delete : If you check it, Record Period setup is activated.

If you setup the auto delete, recorded data only in the confi gured period are searchable.

5.When the recording option setup is done, press <OK>.

SETTING THE EVENT

You can set recording options for sensor, motion, and video loss event.

Sensor Detection

You can set the sensor’s operating condition and connected camera, as well as alarm output and its duration.

Using the mouse may help make setup easier.

 USING THE

1.Press the [MENU] button on the remote control or front panel.

2.Use the left/right button (◄ ►) to select <Event>. Event setting menu is selected.

3.	Use the up/down buttons (	) to move to <Sensor
	Detection>, and press [ENTER] button.
	A window of sensor detection setup appears.
4.	Use direction buttons (	) to move to a desired
	item, and set the value.

•Sensor Operation : Sets the operation mode of sensors.

-<OFF> : Sensor does not operate.

-<N.O (Normal Open)> : Sensor is opened. If the sensor is closed, it generates alarm.

-<N.C (Normal Close)> : Sensor is closed.

If the sensor is open by interruption, it generates alarm.

•Cam : Select a channel to be connected to the sensor.

If selected camera, “Cam Preset setup” window appears. Select a channel and setup the preset.

 Preset setup can be done in PTZ mode.

Logout Exit

Event

Sensor Detection

Motion Detection

Video Loss Detection

Alarm Schedule

Sensor Detection

Sensor	Sensor Operation	Cam	Alarm	Duration
1	OFF	1	None	10 sec
2	OFF	2	None	10 sec
3	OFF	3	None	10 sec
4	OFF	4	None	10 sec

OK Cancel

Sensor Detection

SensorCam Preset setup
1	CH		OFF	Preset	1	CH	None	10 sec
2			OFF		2		None	Preset
		1		None				10 sec
3			OFF		3		3	None
		2		None			None	10 sec
4			OFF		4		4	None
							None	10 sec
					OK	Cancel
					OK	Cancel

DVR

English _53

Z6806127401A_SRD-470, 470D-IB_EN53 53

2010-04-30 오후 6:08:54