Samsung 470D, SRD-470 Setting the PTZ, When the camera setup is done, press OK, Usingthe DVR

•Progressive : You can set the progressive camera to ON/OFF.

J If you set it to <ON> for the progressive camera, screen flickering will be reduced.

•Screen Setup : The video appeared on the screen may vary depending on the channel’s camera, confi gure the DVR

display to your preferences.

Select a channel and adjust the <(Brightness)>,

< (Contrast)>, and < (Color)> of the selected channel.

•Press the <Init> to initialize settings back to the default 50.

6.When the camera setup is done, press <OK>.

Setting the PTZ

					
Screen Setup
CH1	50	50	50	Init	Apply to All CH
		OK		Cancel	USINGTHE DVR

To use Camera’s PTZ functions, ID and protocols of each camera and DVR should be matched. For other settings, refer to the “Remote Devices” settings. (Page 46)

Using the mouse may help make setup easier.

3.	Use the up/down buttons (	) in <Device> window to	Camera
	move to <Camera>, and press [ENTER] button.
				Camera	PTZ
4.	Select <PTZ>.
				1	0	>	None
				CH	ID		Protocol
	A window of PTZ settings appears.
				2	1	>	None
				3	2	>	None
5.	Use direction buttons (	) to move to a desired		4	3	>	None
	item, and select it.

•ID : Set the ID of the connected camera of each channel. You can easily setup by using the numeric buttons on the

OK Cancel

remote control or front panel.

•Protocol : Set the protocol of the connected camera of each channel.

M You can check the camera’s ID and protocol if you turn the camera off and on after connecting it to the DVR. (Page 65)

6.When the PTZ setup is done, press <OK>.

English _43

Z6806127401A_SRD-470, 470D-IB_EN43 43

2010-04-30 오후 6:08:19