Samsung SRD-470, 470D user manual Mailing Service, Smtp Setting, Event Setting

OK Cancel

TEST

using the DVR

Mailing Service

You can send an e-mail to a DVR-registered user at a specifi c time interval, or if an event occurs.

M If an event occurs with a channel where the camera’s video is set to <OFF> or the remaining recording count is set to <OFF>, only the text notification will be sent to the applicable email address.

SMTP Setting

Sets the SMTP mail server.

Using the mouse may help make setup easier.

3.	In the <Network> setting window, press the up/down			Mailing Service
	(	) button to move to <Mailing Service> and press the
					SMTP		Event	Group		Recipient
	[ENTER] button.
					x ServerType		SMTP mail Server
4.	Select <SMTP>.				x Server
					x Port		25
	You will see the SMTP setting window.
						Use Authentication
5.	Use direction buttons (		) to move to a desired item		x User
					x Password
							********
	and set the value.				x Secure Transfer
							Never.
					x Sender				ex. user@example.net

•ServerType : Displays the connected server type.

OK Cancel

•Server : Enter a server to connect to.

•Port : Sets the communication port.

•Use Authentication : Check this if the SMTP server uses user authentication. The account input box will be activated.

•User : Enter a user to use authentication when connecting to the SMTP server.

•Password : Enter the password of the SMTP server user.

•Secure Transfer : Select one from <Never> and <TLS (if available)>.

•Sender : Use the virtual keyboard to enter the sender’s e-mail address.

 Refer to “Using Virtual Keyboard”. (Page 34)

•TEST : Conducts the test on the server settings.

6.When the SMTP setting is done, press <OK>.

Event Setting

You can set the interval and type of the event that will be sent to the user.

Using the mouse may help make setup easier.

3.	In the <Network> setting window, press the up/down
				Mailing Service
	(	) button to move to <Mailing Service> and press the
						SMTP	Event		Group	Recipient
	[ENTER] button.
					x Event Interval		10 min
4.	Select <Event>.
						x Use Event Transfer
						Sensor		Motion
5.	Use direction buttons (		) to move to a desired item
						Change P/W		HDD Info		Video Loss
	and set the value.					Power On/Off		Manual Record

•Event Interval : Set the event interval.

 If a series of events occurs, the e-mail will be sent at the specified interval, not on each event.

•Use Event Transfer : Select an event type to send if an event occurs.

If the selected event occurs, the e-mail will be sent to the group that has the recipient authority.

6.When the event setting is done, press <OK>.

62_ using the DVR

Z6806127401A_SRD-470, 470D-IB_EN62 62

2010-04-30 오후 6:09:20