Samsung SRP-250 Series Serial Interface Specification ,

Serial Interface Specification

DIP Switch 1 Functions

FUNCTION ON OFF DEFAULT

1 Data Receive Error Ignore Print

¡°

¡±

OFF

2 Hand Shaking XON/OFF DTR/DSR OFF

3 Word length 7 bits 8 bits OFF

4 Parity check Yes No OFF

5 Parity selection EVEN ODD OFF

6 OFF

7 Baud Rate selection Refer to the following table OFF

8 Hexadecimal dump ON OFF OFF

l NOTE : When the word length is 7 bits, you can not parity check OFF status.

Baud rate selection

Transmission speed SW – 6 SW – 7

1200 baud ON ON

2400 baud OFF ON

4800 baud ON OFF

9600 baud OFF OFF

DIP Switch 2 Functions

MODE SW – 1 SW – 2

Epson OFF OFF

Citizen ON OFF

Star OFF ON

Contents

Main Operators Manual All specifications are subjected to change without notice SRP-250 SERIES 1 STATION PRINTER Warning - U.S. Notice - Canada Caution INTRODUCTION NOTE : The socket-outlet shall be near the equipment and it shall be easy accessible. Table of Contents Chapter 1. Unpacking 1-1. Checking the Contents of the printer box 1-2. Locating the printer 1-3. Functions Chapter 2. Connecting the cables 2-1. Connecting the AC adapter to the printer 2-2. Connecting Interface Cable and Drawer Cable to the printer Chapter 3. Installing the roll paper 3-1. Ribbon Cassette Installation 3-2. Roll Paper Installation Page Page Page Chapter 4. Setting the DIP switches Serial Interface Specification Parallel Interface Specification 15 Chapter 5. Hexadecimal Dumping l Insufficient print data to fill the last line can be printed by pressing the feed Chapter 6. The self test Chapter 7. Code Table Page Page Page Page Page 23 Chapter 8. Control Commands Command Notation Explanation of Terms 24 Page 26 27 28 0 nL 255 Page Page Page Page Page Page Page Page 37 Hex 1D 56 m n Decimal 29 86 m n Page Appendix A Connectors Interface Connector Drawer Connector Appendix B Specification Appendix C Removing Jammed Paper (A) Page Removing Jammed Paper (B) Page CONTROL CODES