CONTROL CODES
STAR mode
Control code | Hexadecimal code | Function | |
<ESC> "C" n | 1B | 43 n | Set page length at n lines |
<ESC> "R" n | 1B | 52 n | Select international character set. |
|
|
| Default is according to the dip switch |
|
|
| settings 3, 4 and 5. |
<ESC> "M" | 1B | 4D | Select 7 × 7(Half dots) character |
|
|
| size(Default setting) |
<ESC> "P" | 1B | 50 | Select 9×7(Half dots) character size |
<SO> | 0E |
| Select expanded character mode |
<SI> | 0F |
| Select inverted print mode |
<DC2> | 12 |
| Cancel inverted print mode |
<DC4> | 14 |
| Cancel expanded character |
|
|
| mode(Default setting) |
<ESC> "W" "1" | 1B | 57 31 | Select expanded character mode |
<ESC> "W" <1> | 1B | 57 01 |
|
<ESC> "W" "0" | 1B | 57 30 | Cancel expanded character mode |
<ESC> "W" <0> | 1B | 57 00 | (Default setting) |
<ESC> "4" | 1B | 34 | Red color print selection |
<ESC> "5" | 1B | 35 | Red color print deselection |
<ESC> "E" | 1B | 45 | Emphasized print mode selection |
<ESC> "F" | 1B | 46 | Emphasized print mode deselection |
|
|
| (Default setting) |
<ESC> "a" n | 1B | 61 n | Feed paper n lines |
<ESC><BEL>n1 n2 | 1B | 07 n1 n2 | Adjust drive pulse width for peripheral |
|
|
| unit(Default setting) |
<BEL> | 07 |
| Deferred drive command "A" for |
|
|
| peripheral unit 1 |
<FS> | 1C |
| Immediate drive command "B" for |
|
|
| peripheral unit 1 |
<SUB> | 1A |
| Immediate drive command for |
|
|
| peripheral unit 2 |
<EM> | 19 |
| Immediate drive command for |
|
|
| peripheral unit 2 |
<CAN> | 18 |
| Cancel print data in buffer |
<ESC> "@" | 1B | 40 | Initialize printer |
<ESC> "e" "0" | 1B | 65 30 | FEED switch valid |
<ESC> "e" <0> | 1B | 65 00 | (Default setting) |
<DC3> | 13 |
| Set deselect mode |
<DC4> | 14 |
| Set select mode |
<ESC> U n | 1B | 55 n | Set or Cancel |
<ESC> - n | 1B | 2D n | Set or Cancel underline mode |
Control code | Hexadecimal code | Function | |
<ESC> "e" "1" | 1B | 65 31 | FEED switch invalid |
<ESC> "e" <1> | 1B | 65 01 |
|
