Vacuum Cleaner Assembly
Attach Vacuum Hose and Tools
1 Wrap the cord around hooks for storage. The top hook rotates right or left for easy cord release.
4 Slide the extend wand into the storage clip. Insert the crevice tool into the nook.
2 Attach the hose with two screws from the assembly packet. Tighten securely them with a screw driver.
5 Snap in the Dusting brush and insert upholstery brush into the storage clip as shown.
3 Snap the hose into the hose clip as shown.
NOTE: The powerfoot will not operate effectively unless the Hose is firmly attached to the base.
5
