Samsung SU-8500 Maintenance, Dirt-Cupcheck or Filter clogged Indicator, Cleaning the Dirt cup

Unplug the Cleaner from electrical outlet.

Unplug the Cleaner from electrical outlet.

The Cartridge Filter Tank assembly can be reached by pulling it from the cleaner.

Unplug the Cleaner from electrical outlet.

Maintenance

Dirt-Cup check or Filter clogged Indicator

The Dirt-Cup check Indicator on the front of the vacuum shows a red or green display. When the Dirt-Cup display is green, the Dirt-Cup is not yet full or the filter is not clogged. When the indicator turns to red, the Dirt-Cup needs to be emptied or the filter needs to be cleaned.

If the display is still red after emptying the dust container, turn the cleaner off to see if the hose, tube, or nozzle is clogged .

Cleaning the Dirt cup

1

2 The Dirt cup can be reached by removing the Dirt cup, reaching underneath the Upper Tank and turning the rim of the Filter Frame to unlock. Pull straight down to remove. Brush the dirt off the Louvers and Dirt cup.

3 The foam Upper Tank Filter may be removed and hand washed in cold water with mild detergent. Rinse well then air dry throughly before replacing.

Cleaning the Cartridge Filter Tank

1

2

3 Remove the cover from the Cartridge Filter Tank, and the foam may be removed and hand-washed in cold water with mild detergent, then air dried.

4 Reposition Filters when completely dry.

WARNING:

Do not operate cleaner with damp or wet filters or without all filters in place.

Cartridge Filter Tank

Cleaning the HEPA Media Post-Motor Filter

1

2 The HEPA Media Post-Motor Filter assists in the filtration process to return clean air to the room. It is located behind the door on the side of the cleaner. If the filter becomes dirty, open the door, remove the filter and clean. To remove this filter, open the door on the side of the cleaner, grasp filter and pull it straight out.

3 Reposition the HEPA Media Post-Motor Filter, then lock the door.

HEPA Media Post-Motor Filter

WARNING:

To reduce the risk of injury from moving parts, turn off vacuum cleaner and disconnect Power Plug from electrical outlet.

9