Samsung Tab4 Reconnect to a Bluetooth Device, Disconnect or Unpair from a Bluetooth Device

Reconnect to a Bluetooth Device

1.From a Home screen, touch ➔ Settings ➔ Connections tab ➔ Bluetooth.

2.Touch the OFF/ON button to turn Bluetooth ON .

3.Make sure that the target device is discoverable.

4.Touch the target device's name in the Bluetooth devices section.

5.If prompted to enter a passcode, try 0000 or 1234, or consult the target device's documentation.

Disconnect or Unpair from a

Bluetooth Device

Disconnect from a Bluetooth Device

You can disconnect your device from a Bluetooth device, such as a headset. Disconnecting does not unpair the Bluetooth device— the next time you connect, your device and the target device will recognize each other and exchange information without having to enter a passcode or PIN.

1.From a Home screen, touch ➔ Settings ➔ Connections tab ➔ Bluetooth.

2.Touch the OFF/ON button to turn Bluetooth ON .

3.Touch the connected device, and then touch OK to disconnect.

Unpair from a Bluetooth Device

You can make your device forget its pairing connection with another Bluetooth device. To connect to the other device again, you may need to enter or confirm a passcode again.

1.From a Home screen, touch ➔ Settings ➔ Connections tab ➔ Bluetooth.

2.Touch the OFF/ON button to turn Bluetooth ON .

3.Under Paired devices, touch next to the device, and then tap Unpair.

Bluetooth Settings

When Bluetooth is on, additional settings are available.

1.From a Home screen, touch ➔ Settings ➔ Connections tab ➔ Bluetooth.

2.Touch the OFF/ON button to turn Bluetooth ON .

3.Touch your device's name to enable or disable visibility to other Bluetooth devices. When your device is visible, other devices can find your device during a scan. Your device remains visible for the period of time set in the Visibility timeout setting.

61