![](/images/new-backgrounds/1278719/27871931x1.webp)
I N S TA L L AT I O N
Connecting to a Cable Box that Descrambles All Channels
1
Find the cable that is connected to the ANTENNA OUT terminal on your cable box.
2
Connect the other end of this cable to the “ANT 2 IN (Cable)” terminal on the rear panel.
œThis terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.
Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a
1
Find and disconnect the cable that is connected to the ANTENNA IN terminal on your cable box.
œThis terminal might be labeled “ANT IN”, “VHF IN” or simply, “IN”.
2
Connect this cable to a
Incoming Cable
Splitter
3 |
| |
Connect a coaxial cable |
| |
between an OUTPUT | Incoming Cable | |
terminal on the splitter | ||
|
and the IN terminal on the | Splitter |
cable box. | Cable Box |
continued...