Samsung TX-T2791H manual Connecting a VCR, Connecting a Camcorder

Connecting a VCR

Video Connection

These instructions assume that you have already connected your TV to an antenna or a cable TV system(according to the instructions on page 6). Skip step 1 if you have not yet connected to an antenna or a cable system.

_,_ • Each VCR has a different back panel configuration.

•When connecting a VCR, match the color of the connection terminal to the cable.

1 Unplug the cable or antenna from the back of the TV.

2	Connect the cable or antenna to the ANT IN terminal on the				Rear of the TV
	back of the VCR.		VCR	_	q@e	L_J
3	Connect an Antenna cable between the ANT OUT terminal		J\		@	[_J
	on the VCR and the ANT iN terminal on the TV.
4	Connect a Video Cable between the VIDEO OUT jack on
	the VCR and the AV iN 1	[VIDEO] jack on the TV.
5	Connect Audio Cables between the AUDIO OUT jacks on
	the VCR and the AV iN 1	[L-DVI IN/AUDIO-R] jacks on the

TV.	%
If you have a "mono'(non-stereo) VCR, use a
	AntennaCable(Netsupp!ied)
Y-connector (not supplied) to hook up to the right and
left audio input jacks of the TV. If your VCR is stereo,
you must connect two cables.
Also, you can connect to AV IN 2 on the side panel of TV.

S-Video Connection

Your Samsung TV can be connected to the S-Video jack of a VCR.

(This connection delivers a better picture when compared to the regular video connection above.)

•Each VCR has a different back panel configuration.

•When connecting a VCR, match the color of the connection terminal to the cabte.

1Tobegin, follow steps 1-3 in the previous section to connect the antenna or cable to your VCR and your TV.

Side of the TV Rear of the TV

VCR

2Connect an S-Video Cable between the S-VIDEO OUT jack on the VCR and the AV IN 2 [S-VIDEO] jack on the TV.

3Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AV iN 2 [L-AUDIO-R] jacks on the TV.

Some games may be displayed with a cut off picture when the TV is connected to a game player.

Connecting a Camcorder

The side panel jacks on your TV make it easy to connect a camcorder to your TV.

They allow you to view the camcorder tapes without using a VCR.

_,_ • Each Camcorder has a different back panel configuration.

• When connecting a Camcorder, match the color of the connection terminal to the cable.

1 Connect a Video Cable (or S-Video Cable) between the	Camcorder	Side of the TV
AV IN 2 [VIDEO] (or S-ViDEO) jack on the TV and the
VIDEO OUT jack on the camcorder.

2Connect Audio Cables between the AV IN 2

[L-AUDIO-R] jacks on the TV and the AUDIO OUT jacks on the camcorder.