Setting the Blue Screen Mode
If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background.
If you wish to continue viewing the poor picture, you must set the "Blue Screen" mode to "Off".
1Press the MENU button to display the menu.
Press the A or _'button to select Setup, then press the ENTER button.
2Press the A or _'button to select Blue Screen, then press the ENTER button. Press the A or _'button to select On or Off, then press the ENTER button. Press the EXIT button to exit.
Adjusting the Melody Sound
The TV power on/off melody sound can be adjusted.
1Press the MENU button to display the menu.
Press the A or T button to setect Setup, then press the ENTER button.
2Press the A or V'button to setect Melody, then press the ENTER button.
3Press the A or _'button to select Off, Low, Medium, or High, then press the ENTER button.
Press the EXIT button to exit.
DD _ Manufactured under license from Dolby Laboratories. D0!bY and the doubte:D i e I "[A L symbol are trademarks of DoIby Laboratories.
Setting the HDMI Black Level
Use this function when the screen is too dim in the HDMI mode. (by HDMI input for the
RGB limited range of 16 to 235)
1Press the MENU button to display the menu.
Press the A or T button to select Setup, then press the ENTER button.
2Press the A or T button to select NDMI Black Level, then press the ENTER button.
3Press the A or _'button to select Normal or Low, then press the ENTER button. Press the EXIT button to exit.
This function is active only when the externel input connects to HDMI(RGB signals).
Setting the Film Mode
Film mode automatically senses and processes film signals from all sources and adjust the picture for optimum quality.
_,_ Film mode is supported in 480i only.
1Press the MENU button to display the menu.
Press the A or _'button to seIect Setup, then press the ENTER button.
2Press the A or _'button to select Film Mode, then press the ENTER button.
3Press the _, or T button to select Off or On, then press the ENTER button. Press the EXIT button to exit.
