●● Positioner Settings: Configures the aerial positioner. Positioner: Enables or disables the positioned control.
Positioner Type: Sets the positioned type between DiSEqC 1.2 and USALS (Universal Satellite Automatic Location System).
––My Longitude: Sets the longitude for my location.
––My Latitude: Sets the latitude for my location.
––Satellite Longitude Settings: Sets the longitude of user defined satellites. User Mode: Sets the position of satellite aerial according to each satellite.
If you store the current position of satellite aerial according to a certain satellite, when the signal of that satellite is needed, the satellite aerial can be moved to pre-populated position.
––Satellite: Selects the satellite to set the position for.
––Transponder: Selects a transponder from the list for signal reception.
––Moving Mode: Selects the movement mode between discrete and continuous movement.
––Step Size: Adjusts the step size degrees for the aerial rotation. Step Size is available when Moving Mode is set to Step.
––Go To Stored Position: Rotates the aerial to the stored satellite position.
––Aerial Position: Adjusts and stores the aerial position for the selected satellite.
––Store Current Position: Stores current position as the selected positioner limit.
Installer Mode: Sets limits to the scope of movement of satellite aerial or reset the position. Generally, installation guide uses this function.
––Limit Position: Selects the direction of the positioner Limit.
––Aerial Position: Adjusts and stores the aerial position for the selected satellite.
––Store Current Position: Stores the current position as the selected positioner Limit.
––Go to zero: Moves the aerial to the reference position.
––Reset positioner limit: Allows the aerial to rotate over the full arc. ●● Reset all settings: All satellite settings will be reset to the initial values.