Fine-Tuning the Screen
Broadcasting > Channel Settings > Fine Tune Try Now
"" Available for analogue broadcasts only.
Analogue pictures can become shaky and full of noise. If this happens, you can
1.Select Channel Settings > Fine Tune. An adjustment bar appears on the screen.
2.Press the l or r button to make adjustments. Select Save or Close to apply the new setting. Select Reset to reset the
Transfer Channel List
Broadcasting > Channel Settings > Transfer Channel List
Imports or exports the channel map. When the PIN input screen appears, enter the PIN.
"" Availability depends on the specific model and area.
You should connect a USB storage device to use this function. ●● Import from USB: Import channel list from USB.
●● Export to USB: Export channel list to USB. This function is available when USB is connected.
Satellite System
"" Availability depends on the specific model and area.
Broadcasting > Channel Settings > Satellite System
A set of satellite dish settings must be configured for each wanted satellite before performing a channel scan.
Satellite System is available when Aerial is set to Satellite. When the PIN input screen appears, enter the PIN.
●● Satellite Selection: You can choose the satellites for this TV.
●● LNB Power: Enables or disables the power supply for the LNB.
●● LNB Settings: Configures the outdoor equipment.
Satellite: Selects the satellite for receiving digital broadcasts.
Transponder: Selects a transponder from the list or adds a new transponder.
DiSEqC Mode: Selects DiSEqC mode for the selected LNB.
Lower LNB Oscillators: Sets the LNB oscillators to a lower frequency.
Upper LNB Oscillators: Sets the LNB oscillators to a higher frequency.
Tone 22 kHz: Selects the Tone 22 kHz depending on the LNB type. For a universal LNB it should be Auto.