28
English
Advanced Features
Network Setup (Samsung Auto Configuration)
This function is available in APs (Access Points) that support
Auto Configuration. If your AP does not, you can connect
through PBC (WPS), auto, or manually.
✎
This function is available when SW L(Samsung
Wireless Linkset to Off.
✎
You can check for equipment that suppor ts Samsung
Auto Configuration on www.samsun g.com.
How to set up using Samsung Auto Configuration
1. Place the AP and TV next to each other and turn them
on.
✎
Because the booting times of applic ations differ,
you may have to wait for approximately 2 minutes.
✎
If the LAN cable connected the WAN po rt of AP
during Samsung Auto Configurati on, you are able
to complete until internet connection te st. If you
do not connect, Samsung Auto Configu ration will
check only device connecting o f AP (Not check
internet).
2. After 2 minutes, connect the Samsung Wireless LAN
Adapter to the TV. When the Samsung Wireless LAN
Adapter is established, the pop-up window appears.
3. As soon as a connection is established, place the AP in
parallel with the Samsung Wireless LAN Adapter giving a
gap no larger than 25cm.
4. Wait until the connection is automatically established.
✎
If the connection fails, reset the AP an d then try
again.
✎
If Samsung Auto Configuration doe s not connect
your TV to your AP, a pop-up window appears
on the screen notifying you of the fail ure. Reset
the AP, and then try again. If the connection fails
again, choose one of the other connec tion setup
methods, PBC (WPS), auto, or manual.
5. After the connection is established, locate the sharer at
the desired location.
✎
If the AP settings have been changed o r it is the
first time you use the new AP after purch ase, you
need to set up again beginning from Ste p 1.
Network Setup (PBC (WPS))
How to set up using PBC (WPS)
If your router has a PBC (WPS) button, follow these steps:
1. Connect your TV to your LAN as described in the
previous section.
2. Turn on your TV, press the MENU button on your
remote, use the ▲ or ▼ button to select Setup, and
then press the ENTER
E
button.
3. Use the ▲ or ▼ button to select Network in the Setup
menu, and then press the ENTER
E
button.
4. On the Network screen, select Network Type.
5. Set Network Type to Wireless.
6. Select Network Setup. The Network Setup screen
appears.
Notice
The picture may appear corrupted for some channels when the TV is connected to the Samsung Wireless LAN Adapter. In
such case, establish a connection using one of the following methods:
Method 1 Method 2
Connect using the USB right angle adapter Connect via an extension cable
or
[UC6500_XC]BN68-02694A-00L06.indb 28 2010-02-26 오후 11:56:59