Samsung UE46F5000AWXZG Using the TV’s Controller Panel Key, Initial Setup, Standby mode, English

Models: UE32F5070SSXTK UE42F5070SSXTK UE46F5070SSXTK UE32F5070SSXZG UE46F5000AWXZG

1 75
Download 75 pages 46.5 Kb
Page 6
Image 6
Using the TV’s Controller (Panel Key)

Using the TV’s Controller (Panel Key)

The TV's Controller, a small joy stick like button on the rear right side of the TV, lets you control the TV without the remote control. Some functions which require a PIN code may not be available.

The product colour and shape may vary depending on the model. Exits the menu when pressing the controller more than 1 second.

When using the controller in the up/down/left/right directions, make sure you do not push the controller in first. If you push the controller in first it will not move in the up/down/left right directions.

Selecting the Media Play

Selecting the Menu Standby modeInitial SetupIf You Want to Reset This Feature...

Return

Selecting a Source

Power off

Function menu Manual background

Remote control sensor

TV Controller

The image is drawn by facing the front side of the TV.

Standby mode

Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.

Initial Setup

When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the POWERP button. Setup is available only when the source is set to TV.

If you connect any device to HDMI IN 1(STB) before starting the installation, Channel Source will be changed to Set-top box automatically. If you do not want to select Set-top box, please select Aerial.

If You Want to Reset This Feature...

You should do Setup (MENU → System) again at home although you did in shop.

Select System - Setup (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0” (except Italy). If you want to change the PIN number, use the Change PIN function.

If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to “0-0-0-0” (Italy: “1-1-1-1”): POWER (off) → MUTE → 8 → 2 → 4 → POWER (on).

English - 6

[UF5070-ZGZTBN68-04901B-03L04.indb 6

2013-11-21 ￿￿ 8:59:18

Page 6
Image 6
Samsung UE46F5000AWXZG Using the TV’s Controller Panel Key, Initial Setup, Standby mode, If You Want to Reset This Feature