Arkon MARS-3100R/S user manual Setting the Time and Date, Power Management, LAN port, Suspend

2.9.5LAN port

Figure 2.23 LAN port

2.10Setting the Time and Date

Whenever the system timer is not matched with your location or time zone, please reset the time and date by following step:

1.Click START > Control Panel, or START > Settings > Control panel

2.Double click the Date and Time Properties.

3.Select the correct day, month and year.

4.Click OK to save and exit.

2.11Power Management

2.11.1Suspend

To save battery power, or when swapping battery packs, put the MARS-3100R/S into Suspend Mode. There are two suspend modes: Suspend-to-RAM (Standby mode) and Suspend to HDD (Hibernation mode).

1.Suspend-to-RAM (Standby mode)

Suspend-to-RAM occurs when a system enters a low-power state. Information on system configuration, open applications and active files are stored in the main mem- ory. Most other system components are shut-off.

In this mode, although power consumption is very low, the battery may drain and cause data loss. If the MARS-3100R/S is stored for durations longer than a few hours or overnight, it is best simply to turn off the computer instead of using Suspend-to- RAM mode.

Note! The Power LED blinks green. (See chapter 2.3.1)

MARS-3100R/S User Manual 20