Connecting to a COMMON INTERFACE slot (Your TV viewing Card Slot)

Turn the TV off to connect or disconnect a CI card or CI card adapter.

Attaching the CI Card Adapter

Attach the adapter as shown side.

To install the CI CARD Adapter, please remove the sticker attached to the TV.

To connect the CI CARD Adapter, follow these steps.

TV Rear

We recommend attaching the adapter before installing the wall mount, or inserting the “CI or CI+ CARD”.

1.Insert the CI CARD Adapter into the two holes on the product 1.

Please find two holes on the rear of the TV, beside the COMMON INTERFACE port.

2.Connect the CI CARD Adapter into the COMMON INTERFACE port on the product 2.

3.Insert the “CI or CI+ CARD”.

We recommend that you insert the CI card before you mount the TV on a wall. It may be difficult to insert after mounting. Insert the card after attaching the CI Card Adapter on TV. It is difficult to attach the module if you insert the card before attaching.

Using the “CI or CI+ CARD”

To watch paid channels, the “CI or CI+ CARD” must be inserted.

•• If you don’t insert the “CI or CI+ CARD”, some channels will display the message “Scrambled Signal”.

•• The pairing information containing a telephone number, the “CI or CI+ CARD” ID the Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider.

•• When the configuration of channel information has finished, the message “Updating Completed” is displayed, indicating the channel list is updated.

NOTE

••

You must obtain a “CI or CI+ CARD” from a local cable service provider.

 

••

When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or

 

CI+ CARD” may cause damage to it.

 

••

Insert the “CI or CI+ CARD” in the direction marked on the card.

 

••

The location of the COMMON INTERFACE slot may be different depending on the model.

 

••

“CI or CI+ CARD” is not supported in some countries and regions; check with your authorized

 

dealer.

 

••

If you have any problems, please contact a service provider.

 

•• Insert the “CI or CI+ CARD” that supports the current aerial settings. The screen will be distorted or

 

will not be seen.

 

 

English - 8

 

[UF6200-XH]BN68-04879F-04L16.indb 8

 

 

 

2013-11-13 ￿￿ 3:18:38