Connections
Connecting to an Audio Device
Using an Optical (Digital) Cable ConnectionAvailable devices: digital audio system, amplifier, DVD home theatredigital audio systemOPTICAL
✎✎DIGITAL AUDIO OUT (OPTICAL)xx When a digital audio system is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume of both the TV and the system.
xx 5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.
xx When the receiver (home theatre) is set to on, you can hear sound output from the TV’s optical jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theatre receiver. When the source is a digital component such as a DVD /
yy If you don’t insert the “CI or CI+ CARD,” some channels will display the message “Scrambled Signal”.
yy The pairing information containing a telephone number, the “CI or CI+ CARD” ID the Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider.
yy When the configuration of channel information has finished, themessage “Updating Completed” is displayed, indicating the channel list is updated.
✎✎NOTExx You must obtain a “CI or CI+ CARD” from a local cable service provider.xx When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may cause damage to it.
xx Insert the “CI or CI+ CARD” in the direction marked on the card.xx The location of the COMMON INTERFACE slot may be different depending on the model.
xx “CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer. xx If you have any problems, please contact a service provider.
xx Insert the “CI or CI+ CARD” that supports the current antenna settings. The screen will be distorted or will not be seen.
14 English