Samsung UE55C9000ZW ENTER, SOURCE, English, Receiver, ■■ Setup, Description, Device List, Anynet+ Menu, Anynet+ Menu, Stops recording, ¦¦ Setting Up Anynet+

Anynet+ Menu

The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.

Anynet+ Menu	Description
View TV	Changes Anynet+ mode to TV broadcast mode.
Device List	Shows the Anynet+ device list.
(device_name) MENU	Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of
	the DVD recorder will appear.
(device_name) INFO	Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the
	play menu of the DVD recorder will appear.
Recording: (*recorder)	Starts recording immediately using the recorder. (This is only available for devices that
	support the recording function.)
Stop Recording: (*recorder)	Stops recording.
Receiver	Sound is played through the receiver.

If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is connected, it will be represented as (*device_name).

¦¦ Setting Up Anynet+■■ Setup

Anynet+ (HDMI-CEC) (Off / On): To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On. ✎✎ When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated. Auto Turn Off (No / Yes): Setting an Anynet+ Device to turn off automatically when the TV is turned off.

✎✎ If Auto Turn Off is set to Yes, running external devices will turn off at the same time as the TV powers off. However, a device may not turn off if recording is in progress.

✎✎ May not be enabled depending on the device.¦¦ Switching between Anynet+ Devices1.Anynet+ devices connected to the TV are listed.

✎✎ If you cannot find a device you want, press the Red button to refresh the list.

2.Select a device and press the ENTEREbutton. You can switch to the selected device.

✎✎ Only when you set Anynet+ (HDMI-CEC) to On in the Application menu, the Device List menu appears.

xx Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching operation.

xx If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the Device List.

Features Advanced 04

English 49