Basic Features

Channel Menu

¦¦ Retuning Channels

Antenna (Air / Cable)

Before your television can begin memorising the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system).

Country

The PIN input screen appears. Enter your 4 digit PIN number.

■■ Digital Channel: Change the country for digital channels.■■ Analogue Channel: Change the country for analogue channels.

Auto Store

Scans for a channel automatically and stores in the TV.

✎✎Automatically allocated programme numbers may not correspond to actual or desired programme numbers. If a channel is locked using the Child Lock function, the PIN input window appears.

■■ Antenna Source (Air / Cable)t: Select the antenna source to memorise.

■■ Channel Source (Digital & Analogue / Digital / Analogue): Select the channel source to memorise.

When selecting Cable → Digital & Analogue or Digital: Provide a value to scan for cable channels.

Search Mode (Full / Network / Quick): Scans for all channels with active broadcast stations and stores them in the TV.

✎✎ If you select Quick, you can set up the Network, Network ID, Frequency, Modulation and Symbol Rate manually by pressing the button on the remote control.

Network (Auto / Manual): Selects the Network ID setting mode among Auto or Manual.

Network ID: When Network is Manual, you can set up Network ID using the numeric buttons.

Frequency: Displays the frequency for the channel. (differs in each country)Modulation: Displays available modulation values.Symbol Rate: Displays available symbol rates.

Manual Store

Scans for a channel manually and stores in the TV.

✎✎If a channel is locked using the Child Lock function, the PIN input window appears.

■■ Digital Channel: When scanning has finished, channels are updated in the channel list.

✎✎ When selecting Antenna → Air: Channel, Frequency, Bandwidth✎✎ When selecting Antenna → Cable: Frequency, Modulation, Symbol Rate

■■ Analogue Channel (Programme, Colour System, Sound System, Channel, Search): If there is abnormal sound or no sound, reselect the sound standard required.

✎✎Channel mode

xx P (programme mode): When tuning is complete, the broadcasting stations in your area have been assigned to position numbers from P0 to P99. You can select a channel by entering the position number in this mode.

xx C (aerial channel mode) / S (cable channel mode): These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel.

¦¦ Editing ChannelsChannel Manager Option Menu

(in Channel Manager)

1.Select a channel and press the TOOLS button.

2.Edit the channel name or number using theEdit Channel Name or Edit Channel Number menu.■■ Edit Channel Name (analogue channels only): Assign your own channel name.

■■ Edit Channel Number (digital channels only): Edit the number by pressing the number buttons desired.

¦¦ Other Features

Cable Search Option

(depending on the country)

Sets additional search options such as the frequency and symbol rate for a cable network search.

■■ Freq.Start / Freq.Stop: Set the start or stop frequency (differs in each country).

■■ Symbol Rate: Displays available symbol rates.■■ Modulation: Displays available modulation values.
18 English