Basic Features

1.Press the CONTENT button, then the Content View menu will appear.2.Press the ◄ or ► button, then select 3D.

To watch in 3D, wear 3D Active Glasses and press the power button on the glasses.

3.Select OK, then press the ENTEREbutton.4.Using the ◄ or ► buttons on your remote control,

selects the 3D Mode of the image you want to view. ✎✎ Some 3D modes may not be available depending

on the format of the image source.Supported formats and operating specifications for Standard HDMI 3D

✎✎The 3D formats indicated below are recommended by the HDMI association and must be supported.

Source signal format

Standard HDMI 1.4 3D

1920x1080p@24Hz x 2

1920x2205p@24Hz

1280x720p@60Hz x 2

1280x1470p@60Hz

 

 

1280x720p@50Hz x 2

1280x1470p@50Hz

 

 

The mode is automatically switched to 3D mode for the 3D video input in one of the formats above.

For the Standard HDMI 3D format with 24Hz, the TV is optimized as follows:

––Resolution First Display Mode: If Motion Plus is set to Off, Clear or Standard, you can watch the video at a high resolution optimized to the resolution of the source video.

––Judder Reduction Display Mode: When

Motion Plus is set to Smooth or Custom, you can watch a smooth picture without judder.

Before using 3D function...

✎✎NOTE

xx You may notice a small amount of screen flickering when watching 3D images in poor light conditions (from a strobe light, etc.), or under a fluorescent lamp (50Hz ~ 60Hz) or 3 wavelength lamp. If so, dim the light or turn the lamp off.

xx 3D mode is automatically disabled in following cases: when changing a channel or the input source, or accessing Media Play or Internet@TV.

xx Some Picture functions are disabled in 3D mode. xx The Touch Control does not support 3D pictures.

xx Data broadcasts (MHEG / MHP) are not supported in 3D mode.
xx 3D Active Glasses from other manufacturers may not be supported.

xx When the TV is initially powered on, may take some time until the 3D display is optimized.

xx The 3D Active Glasses may not work properly if there is any other 3D product or electronic devices turned on near the glasses or TV. If there is a problem, keep other electronic devices as far away as possible from the 3D Active Glasses.

xx When watching pictures from a 50Hz 3D source with its Game mode On, visually-sensitive viewers may see some flicker on bright images.

xx Photos of Media Play are shown in “2D → 3D” mode only.

xx If you lie on your side while watching TV with 3D active glasses, the picture may look dark or may not be visible.

xx Be sure to stay within the viewing angle and optimum TV viewing distance when watching 3D pictures.

––Otherwise, you may not be able to enjoy proper 3D effects.

xx The ideal viewing distance should be three times or more the height of the screen. We recommend sitting with viewer’s eyes on a level with the screen.

Picture Reset (OK / Cancel)

Resets your current picture mode to its default settings.¦¦ Setting up the TV with Your PCSet the input source to PC.

Auto Adjustment t

Adjust frequency values/positions and fine tune the settings automatically.✎✎Not available when connecting with an HDMI/DVI cable
24 English