Universal Remote Setup
This TV has a universal remote control feature that lets you control cable boxes,
5 cm
Plug the cable into the TV IR connector and then point the transmitter at the other end of the cable towards the external device's remote panel receiver. However, there can' be any obstacles between the IR extension cable and the external device. The presence of an obstacle will interfere with the transmission of the remote control signal.
Add the External Device
1.Turn on the external device you wish to set up universal remote function for and then press SOURCE to bring up the Source screen.
2.Select Universal remote setup from the top of the screen. This initiates the universal remote setup process.
3.Follow the
SETUP
The initial setup dialog appears when the TV is first activated. Follow the
✎✎ If you connect any device to HDMI1 before starting the installation, the Channel Source will be changed to
✎✎ If you do not want to select
Password Change
Screen Menu > System > Change PIN
Change the TV's password.
1.Run Change PIN and then enter the current password in the password field. The default password is
2.Enter a new password and then enter it again to confirm it. The password change is complete.
✎✎ If you forget the PIN code, press the buttons in the following sequence which resets the PIN to
✎✎ For Smart Touch Control: When the TV turnes on: MUTE → Volume up → RETURN → Volume down → RETURN → Volume up → RETURN
English - 10