Samsung UE60F6100AK Network Security Protocols, Network Connection - Wired

Network Security Protocols

The TV only supports the following wireless network security protocols and is unable to connect to non-certified wireless routers:

•• Authentication Modes: WEP, WPAPSK, WPA2PSK

•• Encryption Types: WEP, TKIP, AES

If the wireless router has been set to Pure High-throughput (Greenfield) 802.11n mode and the Encryption Type to WEP or TKIP, Samsung Smart TVs will not support the connection in compliance with the new Wi-Fi certification specifications.

If the wireless router supports WPS (Wi-Fi Protected Setup), it is possible to connect to the network using PBC (Push Button Configuration) or a PIN (Personal Identification Number). WPS automatically configures the SSID and WPA key settings.

Network Connection - Wired

There are three main ways to connect your TV to your network using cable, depending on your network setup. They are illustrated starting below:

TV Rear Panel

The Modem		External Modem
Port on the Wall
	(ADSL / VDSL / Cable TV)

	Modem Cable (Not Supplied)			LAN Cable (Not Supplied)
					TV Rear Panel
The Modem
Port on the Wall
		External Modem	IP Router that has a
	(ADSL / VDSL / Cable TV)		DHCP Server

Modem Cable	LAN Cable	LAN Cable
(Not Supplied)	(Not Supplied)	(Not Supplied)

TV Rear Panel

The LAN Port

on the Wall

LAN Cable (Not Supplied)

✎✎ The TV does not support network speeds less than or equal to 10Mbps. ✎✎ Use Cat 7 cable for the connection.

English - 14