You can control your set-top-box or satellite box with the Remote Control. To establish control, you must first set up theIR extender cable. If you don'thave an STB, skip this section.
Connect theIR extender cable to the TV'sIR output connector.
I ------
' IR Out
1 Connect theIR Extender
1 Cable here.
I
<t ~r=l
• (I]
•e cmiiKJ•
•s
-The displayed image may differ depending on the model.
Place the transmitter end within 4 inches of the set- top-box'sremote control sensor.
~Position the transmitter end within 4 inches (1 0 em) of the set-top-box'sremote control sensor, pointing in the direction of the sensor. Make sure there are no obstacles between the transmitter end of theIR extender cable and the set- top-box or satellite box. Any obstacles will interfere with the transmission of the remote control signals.
... Finalize control of your set-top or satellite box when you run Initial Setup.
