Securing the TV to the Wall
Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install the
To avoid the TV from falling
✎✎Since the necessary clamps, screws, and string are not supplied, please purchase these additionally.
1. Drive the screws into the clamps and firmly fasten them onto the wall. Make sure the screws are firmly fixed into the wall.
✎✎ Screw Specifications
xx For a 32 ~ 40 Inch LED TV: M6
xx For a 46 ~ 60 Inch LED TV: M8
2.Remove the screws from the centre back of the TV, put the screws into the clamps, and then fasten the screws onto the TV again.
3. Connect the clamps fixed onto the TV and the clamps fixed onto |
| |
the wall with a strong string and then tie the string tightly. |
| |
✎✎ Verify all connections are properly secured. Periodically | Wall | |
check connections for any sign of fatigue for failure. If you | ||
| ||
have any doubt about the security of your connections, |
| |
contact a professional installer. |
| |
✎✎ Install the TV near to the wall so that it does not fall |
| |
backwards. |
| |
✎✎ It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on | ||
the TV. Untie the string before moving the TV. |
| |
English - 20
