| Input Source | Picture Size |
| | |
| ATV, AV, Component (480i, 480p) | 16:9, Zoom1, |
| Zoom2, 4:3 |
| |
| | |
| DTV (1080i, 1080p), Component (1080i, | 16:9, Wide Fit, |
| 1080p), HDMI (720p, 1080i, 1080p) | 4:3, Screen Fit |
| | |
■■Digital Noise Filter (Off / Low / Medium / High / Auto) : If the broadcast signal received by your TV is weak, you can activate the Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen.
✎✎ When the signal is weak, try all the Digital Noise Filter options until the TV displays the best picture.
■■HDMI Black Level (Normal / Low) : For HDMI signals, select the black level to adjust the screen depth. Low make blacks look darker.
✎✎ Available only in HDMI mode (RGB signals).
■■Film Mode (Off / Auto) : Sets the TV to automatically sense and process film signals from all sources and adjusts the picture for optimum quality.
✎✎ Available in ATV, DTV (interlace), AV, COMPONENT (480i / 1080i) and HDMI (480i / 1080i).
■■LED Motion Plus (Off / On): Removes drag from fast scenes with a lot of movement to provide a clear picture.
Picture Reset
■■Picture Reset (Reset Picture Mode/Cancel): Resets the picture settings to their factory defaults.
Sound Menu
Mode t
■■Standard: Selects the normal sound mode.
■■Music: Emphasizes music over voices.
■■Movie: Provides the best sound for movies.
■■Clear Voice: Emphasizes voices over other sounds.
■■Amplify: Increase the intensity of high-frequency sounds to allow a better listening experience for the hearing impaired.
Equalizer
Available in Standard sound mode only.
■■Balance L/R: Adjusts the balance between the right and left speaker.
■■100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment): Adjusts the loudness of specific bandwidth frequencies.
■■Reset: Resets the equalizer to its default settings.
SRS TruSurround HD (On/Off)
Available in Standard sound mode only.
SRS TruSurround HD is a patented SRS technology that solves the problem of playing 5.1 multichannel content through two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats.
Preferred Language
Digital channels only.
Digital-TV broadcasts can transmit many audio tracks simultaneously (for example, simultaneous translations of a program into foreign languages).
✎✎ You can only select a language from among the ones being broadcast.
Multi-Track Sound (MTS)
Analog channels only.
■■Mono: Select for channels that are broadcasting in mono or if you are having difficulty receiving a stereo signal.
■■Stereo: Select for channels that are broadcasting in stereo.
■■SAP: Select to listen to the Separate Audio Program, which is usually a foreign-language translation.
✎✎ Depending on the program being broadcast, you can listen to Mono, Stereo or SAP.
Auto Volume
Because each station has its own broadcasting conditions, the volume may fluctuate each time you change the channel. This feature automatically adjusts the volume of a channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.
SPDIF Output
The SPDIF (Sony Philips Digital InterFace) outputs an uncompressed digital audio signal when you connect the digital audio jack on the back of the TV to a digital audio in jack on a receiver or home theater.
■■Audio Format (PCM/Dolby Digital): You can select the Digital Audio output (SPDIF) format. The available Digital Audio output format may differ depending on the input source.
✎✎ By connecting the TV to a receiver or home theater with Dolby Digital and 5.1ch speakers and selecting Dolby Digital, you can maximize your interactive 3D sound experience.
■■Audio Delay: Lets you correct timing mismatches between the audio track and the video when you are watching the TV and listening to digital audio output from the TV through an external device such as an AV receiver. When you select Audio Delay, a slider appears. Use the left and right arrow buttons to adjust the slider. Press ENTEREwhen done (0ms ~ 250ms).
Speaker Settings
■■Speaker Select (External Speaker / TV Speaker)
If you are listening to the sound track of a broadcast or movie through an external receiver, you may hear a sound echo caused by the difference in decoding speed between the TV’s speakers and the speakers attached to your audio receiver. If this occurs, set the TV to External Speaker.
✎✎ When you set Speaker Select to External Speaker, the TV’s speakers are turned off. You will hear sound through the external speakers only. When you set Speaker Select to TV Speaker both the TV’s speakers and the external speakers are on. You will hear sound through both.
✎✎ When Speaker Select is set to External Speaker, the VOLUME and MUTE buttons will not operate and the sound settings will be limited.
✎✎ If there is no video signal, both the TV’s speakers and the external speakers will be mute.
Sound Reset
■■Reset All: Resets all sound settings to the factory defaults.
