Samsung UN75F8000XZA, UN65F8000XZA, UN60F8000XZA, UN55F6300XZA, UN55F8000, UN46F8000 Anynet+ HDMI-CEC

Anynet+ (HDMI-CEC)

There is something wrong with the TV.

Try this!

	Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+
	devices only.
	Only one external device may be connected to Receiver.
	Check if the power cord of the Anynet+ device is properly connected.
	Check the cable connections of the Anynet+ device.
Anynet+ does not	Navigate to the System menu and verify that Anynet+ (HDMI-CEC)is set to On.
work.	Check whether the TV remote panel is in TV mode.
	Check whether the remote panel is Anynet+ compatible.
	Anynet+ may not function under certain circumstances. (Searching channels,
	operating Smart Hub or Setup, etc.)
	If you have disconnected and then reconnected the HDMI cable, scan for devices
	again or turn your TV off and on.
	Check if the Anynet+ device is properly connected to the TV and then navigate to
I want to start	the System menu to see if Anynet+ (HDMI-CEC)is set to On.
Anynet+.	After checking, select the virtual remote panel's TOOLS button to display the list.
	Select Anynet+ (HDMI-CEC)from the list.
I want to exit Anynet+.	Select View TV from the Anynet+ menu.
	Select a non-Anynet+ device from Source.
The message
"Connecting to	You cannot use the remote panel when you are configuring Anynet+ or switching
Anynet+ device..."
	to a viewing mode. Use the remote panel after the TV has completed the Anynet+
or "Disconnecting
	configuration or has switched to a viewing mode.
from Anynet+ device"
appears on the screen.
The Anynet+ device	You cannot use the play function when Setup is progress.
won't play.
	Check whether the device supports Anynet+.
	Check whether the HDMI cable is properly connected.
	Navigate to the System menu and verify that Anynet+ (HDMI-CEC)is set to On.
The connected device	Scan for Anynet+ devices again.
	Anynet+ devices must be connected to the TV using an HDMI cable. Make sure the
is not displayed.
	device is connected to your TV with an HDMI cable. Some HDMI cables may not
	support Anynet+.
	If the connection is terminated because there has been a power failure or the HDMI
	cable has been disconnected, please scan for the device again.
The TV audio is not	Connect an optical cable to the TV and the receiver.
	ARC enables digital sound to be output via the HDMI (ARC) port.
being played through
	However, ARC is only available when the TV is connected to an audio receiver that
the receiver.
	supports ARC.