Samsung V50 user manual Connecting to a Power Source, Ni-ZnHigh capacity, Lithium, Polarity+

Connecting to a Power Source

There are two ways in which to provide the camera with power. You can use batteries or alternatively, you can use an AC(100 ~ 250V) Adapter (DC 5.0V 2.0A).

We recommend using batteries for a digital camera (Within a year from the date of manufacture). The batteries are listed below.

Non rechargeable batteries : AA type		- Alkaline(High capacity), Ni-Mn(High capacity),
		Ni-Zn(High capacity), Lithium
	CR-V3 type	- Lithium
Rechargeable batteries	: AA type	- Ni-MH (over 2300mAh), Ni-Cd (over 1100mAh)
	CR-V3 type	- SBP-1303
	Exclusive type - SLB-1437

Using the batteries	: If the camera does not turn on after you have inserted batteries,
		please check whether the batteries are inserted with the correct
		polarity(+/-).

1.Open the battery chamber cover by pushing in the direction of the arrow.

2.Insert the batteries taking note of the polarity (+ / -).

3.To close the battery chamber cover, push it until it clicks.

Removing the battery	: Please use the following steps to remove the manufacturer’s
	rechargeable battery SLB-1437.
	1. Turn off the camera power. Open the battery chamber cover and
	move the battery holder aside. The battery will be released.
	2. Take out the battery and close the battery chamber cover.

There are 3 indicators for battery condition that are displayed on the LCD monitor.

Battery indicator
The batteries are fully	Prepare new	There is no battery capacity.
Battery status	batteries.	Replace with new batteries.
charged.

16