Samsung V50 user manual PictBridge Dpof Auto Print, PictBridge Reset, For details, please refer to

PictBridge : DPOF AUTO PRINT

This allows you to directly print the files with DPOF information. For instructions on how to set up DPOF, refer to pages 72 to 73.

1.Connect the camera to your printer.

The USB menu must be set to [PRINTER] before you connect the camera to the printer.(See p.74)

2.The [PICTBRIDGE] menu will appear.

3.Select the [DPOF PRINT] menu using the UP/DOWN button and press the RIGHT button. Next, select [YES] using the Up/Down button, and then press the OK button.

4.The screen shown on the right will appear and the picture will be printed. If no picture is selected, the [NO IMAGE!] message will be displayed. If you press the SHUTTER button during printing, printing will be cancel and the menu from Step 2 will appear.

5.If an error occurs during printing, the error message number 6 on page 77 will be displayed.

For details, please refer to page 77.

PICTBRIDGE
SELECT	YES
PRINTER SETUP	NO
PRINT
DPOF PRINT
RESET

STOP.SHUTTER

PictBridge : RESET

This allows you to restore the values of the PictBridge menu, which was changed in
CUSTOMIZE, to their default values.
1. Connect the camera to your printer.
The USB menu must be set to [PRINTER] before you
connect the camera to the printer.(See p.74)	PICTBRIDGE
2. The [PICTBRIDGE] menu will appear.	SELECT	YES
	PRINTER SETUP	NO
3. Select the [RESET] menu by pressing the UP/ DOWN
	PRINT
button and press the RIGHT button.	DPOF PRINT

4. Select a desired sub menu by pressing the UP/ DOWN	RESET
button and press the OK button.

- If [NO] is selected : Settings will not be reset.

- If [YES] is selected : All print and image settings will be reset.

Default print setting varies depending on the printer manufacturer.

For your printer s default setting, refer to the user s guide that came with your printer.

78