Samsung V50 PictBridge Picture Selection, Pictbridge menu will appear, Currently displayed

PictBridge: Picture Selection

You can select the scope of the PictBridge function.
1. Connect the camera to your printer.
The USB menu must be set to [PRINTER] before you
connect the camera to the printer.(See p.74)		PICTBRIDGE
2. The [PICTBRIDGE] menu will appear.			SELECT	ONE PIC
			PRINTER SETUP	ALL PICs
3. Select the [SELECT] menu by pressing the UP/ DOWN
			PRINT
button and press the RIGHT button.			DPOF PRINT
4. Use the UP and DOWN buttons to select the desired			RESET
submenu value, and then press the OK button.
When [ONE PIC] is selected	: The PictBridge function will be applied only to the picture
	currently displayed.
When [ALL PICs] is selected	: The PictBridge function will be applied to all pictures,
	excluding TIFF, movie clips and voice files.

Setting the Number of Copies to Print

-Select [ONE PIC] or [ALL PICs].

A screen where you can set the number of copies to print will appear as shown below.

01 PRINTS

EXIT:SH

MOVE: COPY: MENU:OK

[ When [ONE PIC] is selected ]

	01 PRINTS
MOVE:	COPY:	EXIT:SH
		MENU:OK
[ When [ALL PICs] is selected ]

-Use the UP and DOWN buttons to select the number of copies to print and then press the OK button.

The number of copies you wish to make : 01~30

Unless you press the OK button, the changed number of prints will not be applied.

-When selecting [ONE PIC] in Step 4, you can use the LEFT and RIGHT buttons to move to the previous or next picture.

-Press the SHUTTER button to return to the PictBridge menu.

75