Samsung V50 user manual Sound, LCD brightness

Sound

If you set the operation sound to ON, various sounds will be activated for camera startup, when button are pressed, and if there is a card error, so that you can be aware of the camera operation status.

Setting Operation Sounds

1.In any mode other than Voice Recording mode, press the MENU button.

2.Press the LEFT/ RIGHT button and select the [SETUP] menu tab.

3.Select the [SOUND] menu by pressing the UP/ DOWN button and press the RIGHT button.

4.Select a desired sub menu by pressing the UP/ DOWN button and press the OK button.

-[SOUND] sub menu : OFF/ LOW/MEDIUM/ HIGH

		2592
SET UP	BACK:	SET:OK
FORMAT
DATE.TIME		OFF
IMPRINT		LOW
LAMP		MEDIUM
SOUND		HIGH

LCD brightness

You can adjust the LCD brightness.

Adjusting LCD Brightness

1.In any mode other than Voice Recording mode, press the MENU button.

2.Press the LEFT/ RIGHT button and select the [SETUP] menu tab.

3.Select the [LCD] menu by pressing the UP/ DOWN button and press the RIGHT button.

4.Select a desired sub menu by pressing the UP/ DOWN button and press the OK button.

-[LCD] sub menu : DARK, NORMAL, BRIGHT

		2592
SET UP	BACK:	SET:OK
DATE.TIME
IMPRINT
LAMP		DARK
SOUND		NORMAL
LCD		BRIGHT

85