Assembling the cleaner
NAME OF EACH PART
[ Charger (Station) ]
Power
Lamp
Charging Lamp
Remote Control
ASSEMBLING 02
Charge Pin
Holder
Vents
Catching Sill
CLEANER THE
[ VIRTUAL GUARD ]
Mode/Power Button
Mode Lamp
Main Body Detection
Sensor
Distance Detection
Sensor
■Installing the batteries
Batteries are not supplied with the product. You have to purchase the batteries separately. Install the alkaline batteries (type D) before use.
1 
Lift the cover of the VIRTUAL GUARD while pressing the locking tab.
2
Install the batteries into the VIRTUAL GUARD as shown by the fi gure below. (If the batteries are installed with the incorrect polarity, the VIRTUAL GUARD will not work.)
3 
After inserting the tip of the cover into the slot, push the other end to close it until it clicks into place.
✽Specifi cation: Alkaline Type D (LR20) batteries
Assembling the cleaner _17