Samsung VCR8855L3B/XEO manual Recharging, Height of the doorsill should be about 1cm or less

Operating the cleaner

Using the robotic vacuum cleaner

Recharging

You can have the robotic vacuum cleaner return to the charger to charge the battery by using the Recharging button.

■ When the robotic vacuum cleaner is operating, press the ( ) button to cancel the operation and press the Recharging button.

1. Press the Recharging button.

- The main unit icon ( ) is turned on and the robotic

vacuum cleaner will return to the charger.

2. To stop the robotic vacuum cleaner while it is returning to the charger, press the () button.

3. To test the auto charge function, press the Recharging button when the robotic vacuum cleaner is less than 1.5 m from the charger.

Using the remote

control

Troubleshooting when the robotic vacuum cleaner does not return to the charger

●Check the installation of the charger

-When the charger is in a location where the charger cannot guide the robotic vacuum cleaner to the charger.

-When the charger is more than 5m away from robotic vacuum cleaner.

:It may require a longer time for the robotic vacuum cleaner to return to the charger.

●Manually charge the robotic vacuum cleaner in the following cases.

-When the charger is installed in a corner.

-When the battery is fully discharged.

-When the robotic vacuum cleaner is trapped by an obstacle (furniture etc.)

-When the robotic vacuum cleaner cannot pass over the doorsill to the location where the charger is installed.

(The height of the doorsill should be about 1cm or less).

Using the main unit

buttons

28_ Operating the cleaner