Samsung VCR8855L3B/XEO, VCR8855L3B/XET, VCR8855L3B/XEF, VCR8855L3B/BOL, VCR8855L3B/SWS Edge Cleaning

Operating the cleaner

Using the robotic vacuum cleaner

EDGE CLEANING

When the Obstacle Sensor detects an obstacle during the cleaning, the Robot Cleaner reduces its speed to minimize the bumping impact and the Bumper Sensor also helps it lower the bumping impact. And, it cleans the corners by reaching to them as close as possible. (This Robot Cleaner is a touching type cleaner; to the obstacles.)

The robotic vacuum cleaner will move by itself and automatically clean the house until cleaning is completed once.

■ If cleaning begins when the robotic vacuum cleaner is docked with the charger station, the time to return to the charger is decreased since the robotic vacuum cleaner remembers its original position while moving.

■ If the battery level becomes too low while cleaning, the robotic vacuum cleaner will automatically return to the charger station and resume cleaning after charging its battery. (Number of cleaning operations resumed: Once)

thecleaner 03operating

Main unit button Remote control button Configuration Sequence

1 Set the mode.

▶

5time

2 Cancel the mode.

While cleaning

NOTE

CAUTION

About the Resume Cleaning function

●If the robotic vacuum cleaner judges cleaning to be complete, resume cleaning is not performed.

●If you move the robotic vacuum cleaner while it is being charged or press a button, robotic vacuum cleaner judges cleaning to be complete (cleaning is not resumed).

Do not move the robotic vacuum cleaner while it is cleaning or press a button while cleaning. Otherwise, the robotic vacuum cleaner judges cleaning to

be complete and starts cleaning again from the beginning.

When cleaning is

complete

Operating the cleaner _33