Operating the cleaner
Installing the robotic vacuum cleaner
Installing the VIRTUAL GUARD
thecleaner
You can confine the robotic vacuum cleaner to a particular section by using Fence (virtual wall) mode or clean several sections one by one using Guard (virtual door) mode.
Mode Lamp
Distance Detection 
SensorFence/Guard/Off
Main Unit Detection Sensor 
Mode/Power Button 
Distance
Distance Control Switch
03operating
2
3
Distance Detection Sensor
Button operations
1.Mode lamp operations
-Fence (virtual wall) Mode: The red lamp flashes.
-Guard (virtual door) Mode: The green lamp flashes.
-Off :The lamp is turned off.
2.Setting the mode
-Whenever you press the Mode/Power button, Fence
(virtual wall) mode ➝ Guard (virtual door) mode ➝
Power off is selected in this sequence.
3.Setting the Fence length
-Set the distance to restrict the access of robotic vacuum cleaner from the VIRTUAL GUARD using the distance control switch.
| Switch Setting | Max | |
| • (Short) | About 1~2m | |
✽ The distance detection sensor | •• (Medium) | About 2~3m | |
forms a virtual straight barrier of the | ••• (Long) | About 3~4m | |
specified fence length. | |||
✽ Set the switch according to the required fence length. | |||
| |||
Forming a Fence (virtual wall)
VIRTUAL GUARD creates an invisible barrier that the robotic vacuum cleaner cannot cross.
E.g. in front of pots, furniture, the front door, and so on.
1.Select Fence (virtual wall) mode using the Mode/ Power button.
- The mode lamp flashes red.
2.Set the fence length using the distance control switch.
Distance
Sensor
A fence (virtual wall) is
formed.
3.Install the VIRTUAL GUARD in front of the area you want to block access from the robotic vacuum cleaner.
-Install the VIRTUAL GUARD so that the distance detection sensor can form an invisible barrier that the robotic vacuum cleaner cannot cross.
Operating the cleaner _25
