Samsung VCR8894L3R/XET Auto Cleaning, Judges cleaning to be complete and does not resume Cleaning

Operating the cleaner

USING THE ROBOTIC VACUUM CLEANER

AUTO CLEANING

The robotic vacuum cleaner will move by itself and automatically clean the house until cleaning is completed once.

■ If cleaning begins when the robotic vacuum cleaner is docked with the charger station, the time to return to the charger is decreased since the robotic vacuum cleaner remembers its original position while moving.

■If the battery level becomes too low while cleaning, the robotic

vacuum cleaner will automatically return to the charger station and resume cleaning after charging its battery. (Number of cleaning operations resumed : Once)

Main unit button Remote control button Configuration Sequence

1 Set the mode.

▶

1time

2 Cancel the mode.

Normal Mode

About the Resume Cleaning function

NOTE ● If the robotic vacuum cleaner has evaluated that cleaning is complete, the resume cleaning function is not performed.

●If you move the robotic vacuum cleaner when it is being

charged or press a button, the robotic vacuum cleaner	Turbo Mode
judges cleaning to be complete and does not resume
cleaning.

● Do not move the robotic vacuum cleaner when it is cleaning or press a button while it is cleaning. Otherwise, the robotic

CAUTION

vacuum cleaner judges cleaning to be complete and starts cleaning again from the beginning.

●When you press the Turbo remote control button, either On

turbo ( ) or Off turbo ( ) is displayed on Edge Mode the display panel in turns. When On turbo is displayed, you

can clean the fl oor in Turbo Mode.

● When you press the Edge remote control button, On Edge

( ) or Off Edge ( ) is displayed on the display panel in turns. When On Edge is displayed, you can clean the fl oor in Edge Mode.

●If you select both Turbo Mode and Edge Mode at the same

time, the (	→	) is display on the display panel in Cleaning Complete
turns.

30_ Operating the cleaner