A fence (virtual wall) is formed.

Operating the cleaner

Installing the robotic vacuum cleaner

Installing the VIRTUAL GUARD

You can confine the robotic vacuum cleaner to

Mode/Power Button

a particular section by using Fence (virtual wall)

Mode Lamp

mode or clean several sections one by one

Main Body

Detection Sensor

using Guard (virtual door) mode.

Distance

 

Detection Sensor

Button operations

1. Mode lamp operations

- Fence (virtual wall) Mode: The red lamp flashes.

- Guard (virtual door) Mode: The green lamp flashes. - Off :The lamp is turned off.

2.Setting the mode

-Whenever you press the Mode/Power button, Fence (virtual wall) mode ➝ Guard (virtual door) mode ➝ Power off is selected in this sequence.

✽The distance of virtual wall is 2.5M at minimum and may differ depending on surroundings and movement status of the robot.

Forming a Fence (virtual wall)

VIRTUAL GUARD creates an invisible barrier that the robotic vacuum cleaner cannot cross.

E.g. in front of pots, furniture, the front door, and so on.

1. Select Fence (virtual wall) mode using the Mode/

Distance

Sensor

Power button.

 

- The mode lamp flashes red.

 

 

2. Install the VIRTUAL GUARD in front of the area you want to block access from the robotic vacuum cleaner.

-Install the VIRTUAL GUARD so that the distance detection sensor can form an invisible barrier that the robotic vacuum cleaner cannot cross.

operating03 cleanerthe

Operating the cleaner _25