Operating the cleaner

Using the robotic vacuum cleaner

Attaching a mopYou can effectively remove dust with the microfiber mop.Mop attachment procedures

operating03 cleanerthe

1.Attach the mop to the Velcro fastener of the mop plate.

-Attach the mop making sure that the mop attachment line is not covered.

Mop attachment line

✽Attach the mop making sure it is level with the mop attachment line.

2. Align the holes of the mop plate with the parts at the bottom of the cleaning robot and push the parts until they ‘click’ into place.

- Note that if you install the mop plate incompletely,

it may separate while cleaning.

Parts to install

Mop plate fixing

the mop plate

holes

3.Place the mop plate to which the mop is attached on the floor and push it down.

● Since the cleaning robot cannot move over

CAUTION carpets after attaching a mop, remove the mop and mop plate from the cleaning robot before

cleaning a carpet.

● After cleaning, wash the contaminated mop. ● Use the mop only after completely drying it.

(You cannot use a wet mop.)

● If there is liquid such as coffee on the floor, do not use the mop to clean it to prevent secondary contamination of the floor by the liquid.

Operating the cleaner _27