Samsung VCR8950L3B/SML manual Installing the charger, Install the charger on a fl at surface

Installing the charger

Power lamp Charging lamp

1. Install the charger on a fl at surface.

03 OPERATING

2.	There should be no obstacles and cliffs 0.5m to the left and
	right and within 1 m of the front.
		5m
	about	0.
3.	Install the charger in a location where it can be easily accessed by
	the vacuum cleaning robot.

		5m
about		0.
about	1m

4.Arrange the power cord along the wall.

5.When the fl oor is made of wood, install the charger in the same direction as the grain of the wood.

Always keep the power cord of the charger plugged NOTE into the power outlet.

-If no power is supplied to the charger, the vacuum cleaning robot will not be able to fi nd the charger and will not be able to charge automatically.

-If the vacuum cleaning robot is separated from the charger, the battery is automatically discharged.

operating _21