ENGLISH
2121
✤The amount of continuous recording time available depends on
- The type and capacity of the Battery pack you are using.
- How often the zoom function is used.
It is recommended that you have several batteries available.
1. Attach the Battery pack to the Camcorder.
2. Connect the AC Power adapter to an AC Cord and
connect the AC Cord to a wall socket.
3. Connect the DC cable to the DC jack socket on the
Camcorder.
4. Turn the Power switch to Off, and the charging
indicator will start to flash, showing that the battery is
charging.
5. When the battery is fully charged, disconnect the Battery pack and
the AC Power adapter from the Camcorder.
Even with the Powerswitched Off, the Battery pack will still
discharge.

[ Notes ]

■
The Battery pack may be charged a little at the time of purchase.
■
To prevent reduction in the life and capacity of the Battery pack,
always remove it from the Camcorder after it is fully charged.
■
The amount of continuous recording time available depends on:
- The type and capacity of the Battery pack you are using.
- How often the zoom is used.
- Type of use (Camcorder/Camera/With LCD screen etc.).
- Ambient temperature.
It is recommended to have additional battery packs available.
■
Even when the Power switched Off, the Battery pack will still discharge if it is
left attached to the device.
Preparation
Using the Lithium Ion Battery Pack

Charging the Lithium Ion Battery Pack

✤
■
■
■
■
Power Switch
4
< Charging indicator>

Blinking time

Once per second
Twice per second
Three times per second
Blinking stops and stays on
On for a second and off for a second

Charging rate

Less than 50%
50% - 75%
75% - 90%
90% - 100%
Error - Reset the Battery pack and the DC cable