Samsung VP-D352 manual Viewing the Demonstration, System, then press the Menu selector

ENGLISH
System Menu Setting	System

Viewing the Demonstration

✤ Before you begin: Make Sure that there is no tape inserted in the Camcorder. ✤

(see page 36)	✤
✤ Demonstration automatically shows you the major functions that	are included
with your Camcorder so that you may use them more easily.	1
✤ The Demonstration function may only be used in the Camera
mode without a tape inserted in the Camcorder.
✤ The Demonstration operates repeatedly until the
Demonstration mode switched Off.

1. Set the Power switch to CAMERA.

2.	Set the Mode switch to TAPE.
	(VP-D353(i)/D354(i)/D355(i) only)	4
3.	Press the MENU button.			Camera Mode
			√System
	■ The menu list will appear.			Clock Set
4.	Move the Menu selector to the left or right to select			Beep Sound		√On
				Language		√English
	System, then press the Menu selector.			Demonstration		√On
5.	Move the Menu selector to the left or right to select
	Demonstration, then press the Menu selector.
				Move	Select			Exit
							MENU

✤

✤

■

6. Move the Menu selector to the left or right to select On,
then press the Menu selector.	6

7.Press the MENU button.

■ The Demonstration will begin.

8.To quit the Demonstration, press the MENU button.

[ Notes ]

■The Demonstration mode is automatically activated when the Camcorder is left idle for more than 10 minutes after switching to the Camera mode (no tape is inserted in the Camcorder).

■If you press other buttons (FADE, BLC, PHOTO, EASY.Q) during the Demonstration mode, the demonstration stops temporarily and resumes 10 minutes later if you do not operate any other functions.

■While setting the NITE PIX to ON, the Demonstration function does not work.

Camera Mode

Back

Clock Set

Beep Sound

Language

Demonstration Off

On

Move Select MENU Exit

Samsung Camcorder is...

[Digital Camcorder]

■

■

■

■

Demonstration

31