ENGLISH
1919
✤
✤
✤
00:00 1.JAN.2005
✤
✤
✤
Preparation✤The Lithium battery maintains the clock function and preset contents
of the memory; even if the Battery pack or AC Power adapter is
removed.
✤The Lithium battery for the Camcorder lasts about 6 months under
normal operation from the time of installation.
✤When the Lithium battery becomes weak or dead, the
Date/Time indicator will display 00:00 1.JAN.2005
when you set the Date/Time to on.
When this occurs, replace the Lithium battery with
CR2025 type.
1. Remove the Lithium-ion battery from the rear of the
Camcorder.
2. Open the Lithium battery cover on the rear of the
Camcorder.
3. Position the Lithium battery in the Lithium battery
holder, with the positive ( ) terminal face up.
4. Close the Lithium battery cover.
✤You need to insert or replace the Lithium battery when:
- You purchase the Camcorder.
- The remote control doesn’t work.
✤Position the Lithium battery in the Lithium battery holder,
with the positive ( ) terminal face up.
✤Be careful not to reverse the polarity of the battery.
[ Note ]
The Lithium battery must be inserted in the correct direction.
Warning: Keep the Lithium battery out of the reach of the children. Should
any battery be swallowed, consult a doctor immediately.
Lithium Battery Installation
Battery Installation for the Remote Control
(VP-D353(i)/D354(i)/D355(i) only)
Battery Installation for the Internal Clock
VP-D353(i)/D354(i)/D355(i)