ENGLISH
7676
Playback
✤AV In/Out function works only in Player mode.
✤AV In/Out setting enables you to record signal from external sources and
display it on LCD screen.
Also, you can direct your video or image to external devices to record or play
back.
1. Connect the Camcorder to your VCR or TV with the
Audio/Video cable. (See pages 71~72)
2. Set the Mode switch to TAPE. (VP-D353i/D354i/355i only)
3. Set the Power switch to PLAYER.
4. Turn on the VCR or TV.
5. Insert the blank tape with protection tab closed into the
Camcorder.
■
If you want to record from a connected VCR, insert a
recorded VHS tape into the VCR.
6. Press the MENU button.
■
The menu list will appear.
7. Move the Menu selector to the left or right to select
Record, then press the Menu selector.
8. Move the Menu selector to the left or right to select
AV In/Out, then press the Menu selector.
9. Move the Menu selector to the left or right to select
In, then press the Menu selector.
■
If you want to see the Camcorder picture with a TV,
set AV In/Out menu to Out.
10. To exit, press the MENUbutton.
11. Press the Start/Stopbutton to set the Camcorder to
REC PAUSEmode.
■
PAUSEappears on the LCD screen.
12. Select the TV programme or playback the VHS tape.
13. Press the Start/Stop button to start recording.
■
If you want to pause recording for a while, press the
Start/Stop button again.
14. To stop recording, press the (STOP) button.
[ Note ]
When you record the images being played back on an analog VCR, if they are
not being played back at normal speed, (for example, more than double speed
or slow playback), only a gray image appears on the Camcorder.
AVIn/Out (VP-D351i/D352i/D353i/D354i/D355i only)
✤
✤
■
■
■
■
■
VP-D351i/D352i/D353i/D354i/D355i
1
7
√SP
√12Bit
√Off
√Out
Move Select Exit
MENU
Player Mode
√Record
Rec Mode
Audio Mode
Wind Cut
AV In/Out
Move Select Exit
MENU
Out
In
Player Mode
Back
Rec Mode
Audio Mode
Wind Cut
AV In/Out
9