Samsung VP-D352 Setting the Zero Memory (VP-D353(i)/D354(i)/D355(i) only)

4242
ENGLISH
Basic Recording
✤The ZERO MEMORYfunction works in both Camera and Player modes.
✤You can mark a point on a tape that you want to return to following playback.
1. Set the Power switch to CAMERA or PLAYER.
2. Set the Mode switch to TAPE.
3. Press the ZERO MEMORY button on the remote control
before the recording or during playback at the point where you
wish to return.
■
The time code is changed to a tape counter that is set to
ZERO MEMORYwith the 0:00:00 (ZERO MEMORY
indicator).
■
If you want to cancel the ZERO MEMORYfunction, press
the ZERO MEMORYbutton again.
4. Finding the zero position.
■
When you have finished playback, fast forward or rewind
the tape in stop mode.
The tape stops automatically when it reaches the zero
position.
■
When you have finished recording, set the Power switch to
PLAYERand press the (REW) button.
The tape stops automatically when it reaches the zero position.
5. The tape counter with the (ZERO MEMORY indicator) disappears from the
display and the tape counter is changed to the time code.
[ Notes ]
■
In the following situations, ZERO MEMORYmode may be canceled
automatically:
- At the end of the section marked with the ZERO MEMORY function.
- When the tape is ejected.
- When you remove the Battery pack or power supply.
■
The ZERO MEMORYmay not function correctly where there is a break
between recordings on the tape.
Setting the Zero Memory (VP-D353(i)/D354(i)/D355(i) only)
✤
✤
■
■
■
■
■
■
VP-D353(i)/D354(i)/D355(i)
œ
1